Crown Removers CR3S, osung

The existing product was a screw-fastening type that took a long time to fasten and the phenomenon of the fastening loosening due to impact during use was improved. The newly improved crown remover is a one-touch fastening type that is quick and convenient to use as it does not come off even when subjected to impact.
How to use
1) Use a burr to make a gap in the crown, and hang the tip that fits the purpose among the three tips on the handle through the gap, and remove the crown by using the impact (marletting effect) using the ‘weight’ of the handle.
① When assembling the tip to the shaft, push the tip in while slightly twisting it until the spring ‘clicks’.
② When separating the tip, hold the shaft and slightly bend the spring using your thumb and index finger, and then separate the tip. (If you bend it too much, the spring may be damaged and the tip may not be fixed.)
2) If corrosion or cracks are found during use, or if it is dropped on the floor, immediately replace it with another tool and use it.